fireStorm SEQ18 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt nagrywający fireStorm SEQ18. fireStorm SEQ18 14 stron.
Drukuj stronę
GENERAL OPERATION
CONTROLS
BUTTON
Menu
Press to return to the main menu / go back.
Run
Simulate the current settings on the LEDs. The channels will not fire. This is
useful for visualizing the current settings.
Test
Press and hold to check continuity on all channels.
Fire
Only operational when sequencer is ARMED. Press to Trigger the sequencer
if no external Trigger is used.
Rotary Knob
Rotate to increase / decrease selected digit. Press for OK.
Key Switch
Power OFF / ON / ARM.
MENU
MENU ITEM
1] Equal (ALL, 1x18, 2x9, 3x6,
9x2 etc)
2] Different
2.1] Setup
2.2] Load Show
2.3] Clear Show
3] Clock
3.1] Setup
3.2] Load Show
3.3] Clear Show
4] Step
5] Burst
3.1] Setup
3.2] Load Show
3.3] Clear Show
6] Setup
6.1] Pulse
6.2] Language
6.3] Reset
Set an equal time interval between all channels. Channels
may be split into preset groups.
Set relative interval between channels.
Setup a series of intervals.
Load a stored series of intervals.
Clear a stored series of intervals.
Set absolute time channel will fire.
Setup a series of times.
Load a stored series of times.
Clear a stored series of times.
Step to the next channel on each Trigger Input.
Set varying time intervals between user designated
groups.
Setup a series of intervals.
Load a stored series of intervals.
Clear a stored series of intervals.
Device configuration options.
Set the duration of the firing pulse per channel.
Set menu language.
Restore factory defaults.
8 of 13