Xerox Wide Format 7742 Podręcznik użytkownika - Strona 19
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Drukarka Xerox Wide Format 7742. Xerox Wide Format 7742 24 stron. Scan solution
Drukuj stronęSymptoms
Document often jams.
A corner of the document is
folded.
The scanned image contains
gray bars outside of the
document size.
Gray marks show up in the
scanned image as stripes.
Scanner Jam Message
The Scanner Panel has a Forward Feed button and Reverse Feed button to assist with
releasing misfed documents. This is the preferred method of removing the document
from the scanner if the scanned document is not jammed (bunched up) but has simply
stopped. If the scanner stops but is not jammed and the software gives a scanner jam
message, do the following:
1. Press the Stop button on the Scanner Panel.
2. Press the Forward or Reverse button to remove the document from the scanner.
Document Jam
If the document becomes jammed in the scanner, the machine stops and an error
message displays on the screen. Clear the jammed document according to the instructions
displayed, and then reload the document.
Note
The scanner jam message remains on the screen until you clear the jam.
Xerox
®
Wide Format 7742 Scan Solution
User Guide
Remedy
• Check if the document has folds or is curled. If so, flatten out
the document and rescan.
• Check if the document has shiny tape at the lead edge. If so,
reorient the document and rescan.
• Check if the lead edge of the document is damaged. If so, re-
orient the document and rescan.
• Make sure the document is the right size. The minimum size
is 152 mm wide x 152 mm long.
• Make sure the document is a usable media type.
Flatten out the curl and scan the document again.
• Clean the Main Roller. Refer to
• Perform the normalization procedure. Refer to Normalization.
• Clean the Main Roller. Refer to
• Perform the normalization procedure. Refer to Normalization.
Problem Solving
Cleaning the
Scanner.
Cleaning the
Scanner.
3-3