Yamaha A-S500 Instrukcja obsługi - Strona 21

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Yamaha A-S500. Yamaha A-S500 22 stron. Integrated amplifier
Również dla Yamaha A-S500: Instrukcja obsługi (42 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (38 strony)

Drukuj stronę

AUDIO SECTION

• Minimum RMS output power

(8 Ω, 20 Hz to 20 kHz, 0.019% THD)...................... 85 W + 85 W

(6 Ω, 20 Hz to 20 kHz, 0.038% THD).................. 100 W + 100 W

• Dynamic power per channel (IHF) (8/6/4/2 Ω)... 130/150/185/220 W

• Power band width (0.06% THD, 42.5 W, 8 Ω) ...... 10 Hz to 50 kHz

• Damping factor (SPEAKERS A)

1 kHz, 8 Ω................................................................... 240 or more

• Input sensitivity/Input impedance

PHONO (MM)........................................................ 3.0 mV/47 kΩ

CD, etc. .................................................................. 200 mV/47 kΩ

• Maximum input signal

PHONO (MM) (1 kHz, 0.003% THD).................. 60 mV or more

CD, etc. (1 kHz, 0.5% THD) ................................... 2.2 V or more

• Output level/Output impedance

REC............................................................ 200 mV/1.0 kΩ or less

• PHONES jack rated output/Impedance

CD, etc. (Input 1 kHz, 200 mV, 8 Ω) .................... 430 mV/470 Ω

• Frequency response

CD, etc. (20 Hz to 20 kHz) ............................................ 0 ± 0.5 dB

CD, etc. PURE DIRECT on (10 Hz to 100 kHz) .......... 0 ± 1.0 dB

• RIAA equalization deviation

PHONO (MM).................................................................. ± 0.5 dB

• Total harmonic distortion

PHONO (MM) to REC (20 Hz to 20 kHz, 3 V)..... 0.025% or less

CD, etc. to SPEAKERS (20 Hz to 20 kHz, 42.5 W, 8 Ω)

............................................................................. 0.015% or less

• Signal to noise ratio (IHF-A network)

PHONO (MM) (5 mV input shorted) ..................... 88 dB or more

CD, etc. PURE DIRECT on

(200 mV input shorted)...................................... 100 dB or more

• Residual noise (IHF-A network) ............................................ 30 µV

• Channel separation

CD, etc. (5.1 kΩ input shorted, 1/10 kHz)......... 65/50 dB or more

• Tone control characteristics

BASS

Boost/Cut (20 Hz)............................................................ ±10 dB

Turnover frequency ......................................................... 350 Hz

TREBLE

Boost/Cut (20 kHz).......................................................... ±10 dB

Turnover frequency ........................................................ 3.5 kHz

• Continuous loudness control

Attenuation (1 kHz) ............................................................ –30 dB

• Gain tracking error (0 to –99 dB) ................................ 0.5 dB or less

SPECIFICATIONS

GENERAL

• Power supply......................................................... AC 120 V, 60 Hz

• Power consumption.................................................. 240 W, 330 VA

• Standby power consumption ....................................... 0.5 W or less

• YID-W10 standby power consumption

(YID-W10 connect) ..................................................... 1.2 W or less

• iPod charge power consumption ................................... 35 W or less

• Dimensions (W × H × D) ................................ 435 × 151 × 387 mm

• Weight ................................................................... 10.3 kg (22.7 lbs)

Specifications are subject to change without notice.

iPhone, iPod

iPhone, iPod, iPod classic, iPod nano and iPod touch are

trademarks of Apple Inc., registered in the U.S. and other

countries.

(17-1/8" × 6" × 15-1/4")