Yamaha A-S500 Посібник користувача - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Yamaha A-S500. Yamaha A-S500 22 сторінки. Integrated amplifier
Також для Yamaha A-S500: Посібник користувача (42 сторінок), Посібник користувача (20 сторінок), Посібник користувача (38 сторінок)

Yamaha A-S500 Посібник користувача
AUDIO SECTION
• Minimum RMS output power
(8 Ω, 20 Hz to 20 kHz, 0.019% THD)...................... 85 W + 85 W
(6 Ω, 20 Hz to 20 kHz, 0.038% THD).................. 100 W + 100 W
• Dynamic power per channel (IHF) (8/6/4/2 Ω)... 130/150/185/220 W
• Power band width (0.06% THD, 42.5 W, 8 Ω) ...... 10 Hz to 50 kHz
• Damping factor (SPEAKERS A)
1 kHz, 8 Ω................................................................... 240 or more
• Input sensitivity/Input impedance
PHONO (MM)........................................................ 3.0 mV/47 kΩ
CD, etc. .................................................................. 200 mV/47 kΩ
• Maximum input signal
PHONO (MM) (1 kHz, 0.003% THD).................. 60 mV or more
CD, etc. (1 kHz, 0.5% THD) ................................... 2.2 V or more
• Output level/Output impedance
REC............................................................ 200 mV/1.0 kΩ or less
• PHONES jack rated output/Impedance
CD, etc. (Input 1 kHz, 200 mV, 8 Ω) .................... 430 mV/470 Ω
• Frequency response
CD, etc. (20 Hz to 20 kHz) ............................................ 0 ± 0.5 dB
CD, etc. PURE DIRECT on (10 Hz to 100 kHz) .......... 0 ± 1.0 dB
• RIAA equalization deviation
PHONO (MM).................................................................. ± 0.5 dB
• Total harmonic distortion
PHONO (MM) to REC (20 Hz to 20 kHz, 3 V)..... 0.025% or less
CD, etc. to SPEAKERS (20 Hz to 20 kHz, 42.5 W, 8 Ω)
............................................................................. 0.015% or less
• Signal to noise ratio (IHF-A network)
PHONO (MM) (5 mV input shorted) ..................... 88 dB or more
CD, etc. PURE DIRECT on
(200 mV input shorted)...................................... 100 dB or more
• Residual noise (IHF-A network) ............................................ 30 µV
• Channel separation
CD, etc. (5.1 kΩ input shorted, 1/10 kHz)......... 65/50 dB or more
• Tone control characteristics
BASS
Boost/Cut (20 Hz)............................................................ ±10 dB
Turnover frequency ......................................................... 350 Hz
TREBLE
Boost/Cut (20 kHz).......................................................... ±10 dB
Turnover frequency ........................................................ 3.5 kHz
• Continuous loudness control
Attenuation (1 kHz) ............................................................ –30 dB
• Gain tracking error (0 to –99 dB) ................................ 0.5 dB or less

SPECIFICATIONS

GENERAL
• Power supply......................................................... AC 120 V, 60 Hz
• Power consumption.................................................. 240 W, 330 VA
• Standby power consumption ....................................... 0.5 W or less
• YID-W10 standby power consumption
(YID-W10 connect) ..................................................... 1.2 W or less
• iPod charge power consumption ................................... 35 W or less
• Dimensions (W × H × D) ................................ 435 × 151 × 387 mm
• Weight ................................................................... 10.3 kg (22.7 lbs)
Specifications are subject to change without notice.
iPhone, iPod
iPhone, iPod, iPod classic, iPod nano and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
(17-1/8" × 6" × 15-1/4")
17
En