Clark-Reliance Jerguson 360 Series Instrukcja instalacji, obsługi i konserwacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Jednostka sterująca Clark-Reliance Jerguson 360 Series. Clark-Reliance Jerguson 360 Series 12 stron. Safety ballcheck valves

Drukuj stronę

Jerguson

360 Series

7. Place the new spiral-wound gasket on the underside of the inlet gland like shown. Place the new

upstream seat and seal into the inlet gland opening.

Inlet Gland

Spiral-Wound

Gasket

8. Insert the inlet gland assembly from the previous step into the valve as shown.

9. Secure valve into a vice with the large compression nut facing upward. Using a large calibrated

torque wrench, tighten compression nut to 500 Ft-Lbs. Install anti-rotation pin to lock nut in place.

The valve is now ready to be hydro-tested.

16633 Foltz Parkway ● Strongsville, OH 44149 USA ● Telephone: +1 (440) 572-1500 ● Fax: +1 (440) 238-8828

Seat Seal

Upstream Seat

www.Jerguson.com ● [email protected]

IOM J500.36

2017.10