Clark-Reliance Jerguson 360 Series Instrukcja instalacji, obsługi i konserwacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Jednostka sterująca Clark-Reliance Jerguson 360 Series. Clark-Reliance Jerguson 360 Series 12 stron. Safety ballcheck valves

Drukuj stronę
Clark-Reliance Jerguson 360 Series Instrukcja instalacji, obsługi i konserwacji
®
Jerguson
360 Series
8. Gently tap the stem into the valve body and pull out through the process port. The valve is now fully
disassembled.
Reassembly (Replacing the stem packing Part# G294 – Set of 3)
1. Replace thrust washer on stem flange. Align side with chamfer on ID with face of stem flange. Angle
the stem and insert into valve body.
2. Holding stem flange and washer pressed up against top of body, install -3- new packing rings into
stuffing box. Insert first ring and hand press in as deep as possible. Align second ring with slit 180
degrees from first ring and hand press in as deep as possible. Align third ring with slit 90 degrees
from second ring and hand press in as deep as possible. Third ring should be about flush with top of
valve face.
16633 Foltz Parkway ● Strongsville, OH 44149 USA ● Telephone: +1 (440) 572-1500 ● Fax: +1 (440) 238-8828
9
www.Jerguson.com ● [email protected]
IOM J500.36
2017.10
Stem Thrust Washer
Stem