Clarke 7640300 Instrukcja obsługi i konserwacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Elektronarzędzie Clarke 7640300. Clarke 7640300 13 stron. 12v cordless tyre inflator
Drukuj stronę
• For continuous inflation you can
push the switch lock upwards to
lock while the On/Off trigger is
depressed. In this way, inflation
continues without pressing any
button. To stop, simply squeeze
the trigger to release the locking
switch.
NOTE: Note that the tyre inflator has
a 10 minute running/10
minutes resting duty cycle.
• When the desired pressure is reached, the tyre inflator will stop working
as it has pre-set function. when the desired the pressure is reached,
the reading may have a +/- 1.5PSI difference. (This is normal)
8. After use, loosen the hose and remove from the tyre inflator.
WARNING: THE HOSE WILL BE HOT AFTER USE. REMOVE CAREFULLY.
WARNING: IMPROPERLY ATTACHED HOSES OR ACCESSORIES CAN
BECOME DETACHED UNDER PRESSURE AND CAUSE SERIOUS INJURY.
POSSIBLE AIR LEAKS CAN CAUSE FAULTY PRESSURE READINGS. MAKE
SURE ALL CONNECTIONS ARE TIGHTLY SECURED.
WARNING: THE GAUGE IS ONLY TO BE USED AS A REFERENCE, ALWAYS
CARRY OUT A FINAL CHECK OF THE TYRE PRESSURE WITH A GAUGE
CONFORMING TO BS EN 12645.
• When not in use, adaptors provided with the compressor can be clipped
to the storage area on the top of the compressor.
TYRE INFLATION
1. Fix the tyre valve connector onto
the vehicle tyre valve, ensuring
the valve is clean.
• When connected correctly, the
digital display will show the
current pressure in the tyre. If this is
the correct tyre pressure as stated
in your vehicle handbook, remove
the valve connector.
2. If the tyre is below the
recommended pressure (as specified in your vehicle handbook), press
either the '-' or '+' pre-set button to adjust the pre-set value on the display
to the correct tyre pressure.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8