Zanussi ZSF2450 Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zmywarka Zanussi ZSF2450. Zanussi ZSF2450 20 stron. Product manaul
Również dla Zanussi ZSF2450: Podręcznik użytkownika (20 strony), Podręcznik użytkownika (20 strony)

Drukuj stronę

Fault code and malfunction

• digital display shows

The dishwasher does not fill with water

• digital display shows

The dishwasher will not drain

• the drain pump operates continuously

• all indicators lights on the control panel

go off

The anti-flood device operates

The programme does not start

After the check, switch on the appliance. The programme

continues from the point of interruption. If the malfunction

shows again, contact your Service Force Centre.

These data are necessary to help you quickly and cor-

rectly:

• Model (Mod.)

• Product number (PNC)

The dishes are not clean

• The water tap is blocked or furred with limescale.

Clean the water tap.

• The water tap is closed.

Open the water tap.

• The filter in the water inlet hose is blocked.

Clean the filter.

• The connection of the water inlet hose is not correct. The hose can

be kinked or squashed.

Make sure that the connection is correct.

• There is a blockage in the sink spigot.

Clean the sink spigot.

• The connection of the water drain hose is not correct. The hose can

be kinked or squashed.

Make sure that the connection is correct.

• Close the water tap and contact your local Service Force Centre.

• The appliance door is not closed.

Close the door.

• Mains plug is not connected in.

Put in the mains.

• The fuse has blown out in the household fuse box.

Replace the fuse.

• Delay start is set.

Cancel the delay start to start the programme immediately.

The cleaning results are not satisfactory

• The selected washing programme is not applicable for the type of load and

soil.

• The basket is loaded incorrectly so that water cannot reach all surfaces.

• Spray arm does not turn freely because of incorrect arrangement of the load.

• The filters are dirty or not correctly installed.

• The quantity of detergent is too little or missing.

Possible cause and solution

• Serial number (S.N.)

For these data, refer to the rating plate.

Write the necessary data here:

Model description : ..........

Product number : ..........

Serial number : ..........