Zanussi ZSF2450 Podręcznik użytkownika - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zmywarka Zanussi ZSF2450. Zanussi ZSF2450 20 stron. Product manaul
Również dla Zanussi ZSF2450: Podręcznik użytkownika (20 strony), Podręcznik użytkownika (20 strony)
Drukuj stronę
Installation
Warning! Make sure that mains plug is
disconnected from the mains socket during
installation.
Fitting the appliance
Put the appliance adjacent to a water tap and a drain.
When you put the appliance in place, make sure that the
water hoses are not kinked or squashed.
Install the appliance on a kitchen sink, worktop or built-
in..
Positioning
min. 450+5
min. 500
min. 550
Water connection
Inlet hose
The appliance has safety features to prevent that the
water in the appliance goes back into the drinking
water system.
Connect the appliance to a hot (max. 60°) or cold water
supply.
If the hot water comes from alternative sources of energy
that are more environmentally friendly (e.g. solar or pho-
tovoltaic panels and aeolian), use a hot water supply to
decrease energy consumption.
It is important that a water tap or stopcock is near the
dishwasher with easy access.
If the water inlet hose is too short, replace the water inlet
hose with an applicable, longer high-pressure hose. Do
not connect an extension hose.
To suit the installation, it is possible to turn the end of the
hose that is connected to the dishwasher. Do these steps :
Install the dishwasher into
the furniture of the kitchen.
Make sure that the dimen-
sions of the recess agree
with the given dimen-
sions.
Make sure that there are
openings in the furniture
for the inlet hose, the water
drain hose and the mains
cable.
Adjusting the level of the appliance
Make sure that the appliance is level to close and seal the
door correctly. If the level of the appliance is correct, the
door does not catch on the sides of the cabinet. If the door
does not close correctly, loosen or tighten the adjustable
feet until the appliance is level.
Connect the inlet hose to
a water tap with an external
thread of 3/4".
Warning! Make sure that the retaining nut and all
other connections are tight before you move the
dishwasher into position.
Warning! Always use a new water inlet hose. Do
not use connection hoses from an old appliance.
1. Loosen the retaining
nut.
2. Turn the hose.
3. Tighten the retaining
nut.
15