Zanussi ZEV6332FBA Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob Zanussi ZEV6332FBA. Zanussi ZEV6332FBA 12 stron.
Również dla Zanussi ZEV6332FBA: Podręcznik użytkownika (40 strony), Podręcznik użytkownika (40 strony)

Zanussi ZEV6332FBA Podręcznik użytkownika
To remove the dirt:
1. – Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the appli-
ance. Use a special scraper for the
glass . Put the scraper on the glass sur-
face at an acute angle and move the
blade on the surface .
– Remove after the appliance is suffi-
ciently cool: limescale rings , water

Troubleshooting

Problem
You cannot activate the appliance
or operate it.
An acoustic signal sounds and the
appliance deactivates.
An acoustic signal sounds when
the appliance is deactivated.
The appliance deactivates.
The residual heat indicator does
not comes on.
You cannot activate the outer ring.
The sensor fields become hot.
comes on.
comes on.
and number comes on.
8
2. Clean the appliance with a moist cloth and
3. At the end rub the appliance dry with a
Possible cause
The appliance is not connected to
an electrical supply or it is connec-
ted incorrectly.
You touched 2 or more sensor
fields at the same time.
There is water or fat stains on the
control panel.
You put something on one or more
sensor fields.
You put something on the sensor
field
.
The cooking zone is not hot be-
cause it operated only for a short
time.
The cookware is too large or you
put it too near to the controls.
The Automatic Switch Off oper-
ates.
The Child Safety Device function
operates.
There is an error in the appliance.
rings, fat stains, shiny metallic discolora-
tions. Use a special cleaning agent for
glass ceramic or stainless steel.
some detergent.
clean cloth.
Check if the appliance is correctly
connected to the electrical supply
(refer to connection diagram).
Activate the appliance again and
set the heat setting in less than 10
seconds.
Touch only one sensor field.
Clean the control panel.
Remove the object from the sen-
sor fields.
Remove the object from the sen-
sor field.
If the cooking zone operated suffi-
ciently long to be hot, speak to the
service centre.
Activate the inner ring first.
Put large cookware on the rear
cooking zones if necessary.
Deactivate the appliance and acti-
vate it again.
Refer to the chapter "Daily Use".
Disconnect the appliance from the
electrical supply for some time.
Disconnect the fuse from the elec-
trical system of the house. Con-
nect it again. If
again, speak to the service centre.
Remedy
comes on
www.zanussi.com