Zanussi ZEV6332FBA Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Hob Zanussi ZEV6332FBA. Zanussi ZEV6332FBA 12 páginas.
Também para Zanussi ZEV6332FBA: Manual do utilizador (40 páginas), Manual do utilizador (40 páginas)

Imprimir página

To remove the dirt:

1. – Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the appli-

ance. Use a special scraper for the

glass . Put the scraper on the glass sur-

face at an acute angle and move the

blade on the surface .

– Remove after the appliance is suffi-

ciently cool: limescale rings , water

Troubleshooting

Problem

You cannot activate the appliance

or operate it.

An acoustic signal sounds and the

appliance deactivates.

An acoustic signal sounds when

the appliance is deactivated.

The appliance deactivates.

The residual heat indicator does

not comes on.

You cannot activate the outer ring.

The sensor fields become hot.

comes on.

and number comes on.

2. Clean the appliance with a moist cloth and

3. At the end rub the appliance dry with a

Possible cause

The appliance is not connected to

an electrical supply or it is connec-

ted incorrectly.

You touched 2 or more sensor

fields at the same time.

There is water or fat stains on the

control panel.

You put something on one or more

sensor fields.

You put something on the sensor

field

The cooking zone is not hot be-

cause it operated only for a short

time.

The cookware is too large or you

put it too near to the controls.

The Automatic Switch Off oper-

ates.

The Child Safety Device function

operates.

There is an error in the appliance.

rings, fat stains, shiny metallic discolora-

tions. Use a special cleaning agent for

glass ceramic or stainless steel.

some detergent.

clean cloth.

Check if the appliance is correctly

connected to the electrical supply

(refer to connection diagram).

Activate the appliance again and

set the heat setting in less than 10

seconds.

Touch only one sensor field.

Clean the control panel.

Remove the object from the sen-

sor fields.

Remove the object from the sen-

sor field.

If the cooking zone operated suffi-

ciently long to be hot, speak to the

service centre.

Activate the inner ring first.

Put large cookware on the rear

cooking zones if necessary.

Deactivate the appliance and acti-

vate it again.

Refer to the chapter "Daily Use".

Disconnect the appliance from the

electrical supply for some time.

Disconnect the fuse from the elec-

trical system of the house. Con-

nect it again. If

again, speak to the service centre.

Remedy

comes on