Zanussi zft 710 w Podręcznik użytkownika - Strona 44

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zamrażarka Zanussi zft 710 w. Zanussi zft 710 w 48 stron.

Change of door opening direction

Should the setting-up place or handling demand it,

door-opening direction can be refitted from right-hand-

ed to left-handed.

Following operations are to be done on the basis of

figures and explanations:

Break the circuit of the appliance.

Tilt back the appliance carefully being careful so

that the compressor can not touch the floor. It is

recommended to ask another person for help, who

can keep the appliance at this position safely.

Unscrew the adjustable feet situated on both sides

(2 pieces), in addition the screws fixing the lower

door holders (2 pieces) and the screw on the other

side respectively.

Put over the pin in the lower door holding plate in

the direction of the arrow.

Take the door off.

Unscrew the top door holding pin and put it on the

other side.

Fit the door to the top door holding pin.

Fix the bottom door holders on the other side

being careful that the edge of the door is parallel

with the side of cupboard.

Then screw in the one screw in the place set free

on the other side as well as the adjustable feet (2

pieces) and set up the box.

Put over the handle and the plastic nails on the

other side.

Put the appliance to its place, set it level and apply

voltage to it.

In case you do not want to perform the procedures

above, call the nearest brand-mark service.

Technicians will accomplish the refitting expertly for

charge.

This refrigerator is designed to operate on a

230-240 V AC ( ~ ) 50 Hz supply.

The plug must be put into a socket with protective

contact. If there is no such, it is recommended to

get an electrician to fit an earthed socket in com-

pliance with standards near the refrigerator.

This appliance complies with the following

E.E.C. Directives.