Zanussi ZCG63040XA Podręcznik użytkownika - Strona 19

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kuchenki Zanussi ZCG63040XA. Zanussi ZCG63040XA 25 stron.

Problem
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
It takes too long to cook the
dishes or they cook too quick-
ly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The appliance makes noises.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING! Refer to Safety chapters.

TECHNICAL DATA

Dimensions
Height
Width
Possible cause
The oven is deactivated.
The necessary settings are not
set.
The lamp is defective.
The temperature is too low or
too high.
You left the dish in the oven for
too long.
We recommend that you write the data here:
894 - 912 mm
595 mm
Activate the oven.
Make sure that the settings are
correct.
Replace the lamp.
Adjust the temperature if nec-
essary. Follow the advice in the
user manual.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
Some metal parts of the appli-
ance expand and contract
when they heat up or cool
down. The noises are normal.
the appliance cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
Dimensions
Depth
LOCATION OF THE APPLIANCE
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
For the minimal distances of fitting check the table.
Remedy
600 mm
19