Directed Viper 220 MAX Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System bezpieczeństwa Directed Viper 220 MAX. Directed Viper 220 MAX 18 stron. Recreational vehicle security system

Drukuj stronę

H1/11 RED 12Volt Constant Power input

Before connecting this wire, remove the supplied fuse. Connect to the battery positive terminal of the vehicle

battery. On most Japanese motorcycles, 12 volts can be found at starter relay.

NOTE ! On most Japenese motorcycle, a 12 volt power wire is available at the starter

relay.

Some important notes

IMPORTANT! : You must use non-conductive grease on each of the connectors of the security system to avoid

premature deterioration of the pins and connectors. Failure to do so could cause oxidation and prevent the secu-

rity system from functioning correctly thus void the product warranty

POWER CONSUMPTION : Even if your security system is one of the most innovative on the market, it's power

consumption may become excessive in some situations. We recommend that you use your recreational vehicle and

that you should drive it for an extensive period of time once in a while. If the recreational vehicle is used peri-

odically, we recommend that you acquire a low current battery charger / maintainer to preserve the vehicle's

battery life span.