Directed Viper 220 MAX Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System bezpieczeństwa Directed Viper 220 MAX. Directed Viper 220 MAX 18 stron. Recreational vehicle security system
Drukuj stronęPlug-in accessories connector
Programming interface, 3-pin port
The black 3-pin port is provided for programming the unit. The unit can also be programmed using the Bitwriter.
When using the Bitwriter, it is possible to configure any and all of the programmable functions as well as lock
the Transmitter/Receiver and System Features Learn Routines so that unauthorized users cannot change the con-
figuration or program transmitters to the unit.
When the learn routines have previously been programmed using the Bitwriter, they may have been locked. Before
proceeding with reprogramming the learn routines, they must be unlocked with the Bitwriter - this cannot be
done manually with the Valet switch.
Valet/Program switch
The Valet/Program switch should be accessible to the vehicle's driver. It plugs into the blue port on the side of
the unit. Consider how this switch will be used before choosing a mounting location. Don't forget that the switch
is necessary for transmitters and features programmation and will also be used for emergency disarm.
Connecting the receiver antenna
The receiver/antenna connects to the 4-pin White connector on the side of the security system. If the
receiver/antenna is not properly connected to the security system no signal will be received. The security system
will not operate if the receiver/antenna is disconnected.
7
© 2005 Directed Electronics, Inc. (Canada)