Directed Viper 220 MAX 설치 매뉴얼 - 페이지 7

{카테고리_이름} Directed Viper 220 MAX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Viper 220 MAX 18 페이지. Recreational vehicle security system

Plug-in accessories connector

Programming interface, 3-pin port

The black 3-pin port is provided for programming the unit. The unit can also be programmed using the Bitwriter.

When using the Bitwriter, it is possible to configure any and all of the programmable functions as well as lock

the Transmitter/Receiver and System Features Learn Routines so that unauthorized users cannot change the con-

figuration or program transmitters to the unit.

When the learn routines have previously been programmed using the Bitwriter, they may have been locked. Before

proceeding with reprogramming the learn routines, they must be unlocked with the Bitwriter - this cannot be

done manually with the Valet switch.

The Valet/Program switch should be accessible to the vehicle's driver. It plugs into the blue port on the side of

the unit. Consider how this switch will be used before choosing a mounting location. Don't forget that the switch

is necessary for transmitters and features programmation and will also be used for emergency disarm.

The receiver/antenna connects to the 4-pin White connector on the side of the security system. If the

receiver/antenna is not properly connected to the security system no signal will be received. The security system

will not operate if the receiver/antenna is disconnected.