Clarke CMS 200 Instrukcja obsługi i konserwacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke CMS 200. Clarke CMS 200 18 stron. 3 in1 multi sander
Również dla Clarke CMS 200: Instrukcja obsługi i konserwacji (17 strony)
Drukuj stronę
FEATURES
(Ref. Fig. 3)
As its' name implies, the machine is a Bevel/Mitre Saw, capable of straight
cross cutting, and cutting bevels and mitres, or a combination of the two.
The main arm, or Cutting Head, carries the motor and the tungsten carbide
saw blade. It is allowed to swivel to produce mitre cuts and tilt to the left
to produce bevel cuts.
The maximum sizes of wood that may be cut in any of these processes is
given under Specifications on page 15.
A dust extraction outlet (E) is provided at the rear of the machine. If required
it can be connected to a vacuum cleaner which will provide fast and
efficient removal of sawdust. The vacuum cleaner may be used
continuously or intermittently depending upon your requirements.
Saw blades with a bore of 18mm or 20mm may be used.
This saw is not designed for cutting metal, plastics or masonry.
Fig.3
9