Clarke CMS 200 운영 및 유지 관리 지침 - 페이지 9

{카테고리_이름} Clarke CMS 200에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CMS 200 18 페이지. 3 in1 multi sander
Clarke CMS 200에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄
Clarke CMS 200 운영 및 유지 관리 지침

FEATURES

(Ref. Fig. 3)
As its' name implies, the machine is a Bevel/Mitre Saw, capable of straight
cross cutting, and cutting bevels and mitres, or a combination of the two.
The main arm, or Cutting Head, carries the motor and the tungsten carbide
saw blade. It is allowed to swivel to produce mitre cuts and tilt to the left
to produce bevel cuts.
The maximum sizes of wood that may be cut in any of these processes is
given under Specifications on page 15.
A dust extraction outlet (E) is provided at the rear of the machine. If required
it can be connected to a vacuum cleaner which will provide fast and
efficient removal of sawdust. The vacuum cleaner may be used
continuously or intermittently depending upon your requirements.
Saw blades with a bore of 18mm or 20mm may be used.
This saw is not designed for cutting metal, plastics or masonry.
Fig.3
9