Clarke CMS 200 운영 및 유지 관리 지침 - 페이지 11

{카테고리_이름} Clarke CMS 200에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CMS 200 18 페이지. 3 in1 multi sander
Clarke CMS 200에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄

When satisfied, press the

Head Release Button (A), and

gently lower the head so that

the blade makes contact

with the workpiece. Do not

force the blade, a light

pressure is all that is required.

You will notice that to provide

maximum safety, the blade is

not exposed at any time, and

the guard rises automatically

as the blade is lowered.

Nevertheless, NEVER treat the

machine with indifference,

and NEVER be casual with

your approach.

To switch off, release the

starter switch whilst still maintaining full control of the head. NEVER allow

the head to spring upwards - always maintain control. Wait for the blade

to stop completely before removing the workpiece, off-cuts etc.

B. Mitre Cutting

This is a cross cutting operation, except that the saw blade is set at an

angle to the work, but remains perpendicular to the table. This is achieved

by mounting the complete

Head assembly on a table

which is free to rotate by up

to 45° .

To set the required mitre angle

unscrew the table securing

screws (H, fig.5), and rotate

the table, with the head and

saw blade, to the desired

position, lining up the angle

on the scale with the mark on

the edge of the table (J, fig.5).

Lock the table in position with

the locking screws (H).

The procedure for cutting is

the same as that for cross

cutting.

Fig.4

Fig.5