Clarke CMS 200 운영 및 유지 관리 지침 - 페이지 13

{카테고리_이름} Clarke CMS 200에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CMS 200 18 페이지. 3 in1 multi sander
Clarke CMS 200에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄

MAINTENANCE

1. General

The machine is maintenance free, except for changing the saw blade

when necessary, maintaining adjustments, and ensuring that after use,

you clean away any sawdust or wood chips, with a low pressure air line or

brush, paying particular attention to the motor air vents which should be

kept clear at all times.

Should the motor not function normally, it is possible that it has become

clogged with saw dust, in which case, it will be necessary to disassemble

the motor in order to clean the various components. Contact your CLARKE

dealer for advice.

2. Changing the Saw Blade

IMPORTANT: Exercise extreme care when handling the saw blade. The

tips are extremely sharp, and careless handling could result in severe

personal injury.

1. With the machine disconnected from the mains supply, and the

cutting head in the raised position, slacken off the blade securing

bolt.

This is achieved by holding the outer flange steady with the peg

spanner provided, whilst turning the securing bolt (see fig. 8),

CLOCKWISE. The bolt has a LEFT HAND THREAD.

Do not remove the bolt completely.

Fig.8

Fig.9