Clarke CMS 200 Instructions d'utilisation et d'entretien - Page 13
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CMS 200. Clarke CMS 200 18 pages. 3 in1 multi sander
Également pour Clarke CMS 200 : Manuel d'utilisation et d'entretien (17 pages)
Imprimer la page
MAINTENANCE
1. General
The machine is maintenance free, except for changing the saw blade
when necessary, maintaining adjustments, and ensuring that after use,
you clean away any sawdust or wood chips, with a low pressure air line or
brush, paying particular attention to the motor air vents which should be
kept clear at all times.
Should the motor not function normally, it is possible that it has become
clogged with saw dust, in which case, it will be necessary to disassemble
the motor in order to clean the various components. Contact your CLARKE
dealer for advice.
2. Changing the Saw Blade
IMPORTANT: Exercise extreme care when handling the saw blade. The
tips are extremely sharp, and careless handling could result in severe
personal injury.
1. With the machine disconnected from the mains supply, and the
cutting head in the raised position, slacken off the blade securing
bolt.
This is achieved by holding the outer flange steady with the peg
spanner provided, whilst turning the securing bolt (see fig. 8),
CLOCKWISE. The bolt has a LEFT HAND THREAD.
Do not remove the bolt completely.
Fig.8
13
Fig.9