Clarke CMS 200 Instructions d'utilisation et d'entretien - Page 11
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke CMS 200. Clarke CMS 200 18 pages. 3 in1 multi sander
Également pour Clarke CMS 200 : Manuel d'utilisation et d'entretien (17 pages)
Imprimer la page
When satisfied, press the
Head Release Button (A), and
gently lower the head so that
the blade makes contact
with the workpiece. Do not
force the blade, a light
pressure is all that is required.
You will notice that to provide
maximum safety, the blade is
not exposed at any time, and
the guard rises automatically
as the blade is lowered.
Nevertheless, NEVER treat the
machine with indifference,
and NEVER be casual with
your approach.
To switch off, release the
starter switch whilst still maintaining full control of the head. NEVER allow
the head to spring upwards - always maintain control. Wait for the blade
to stop completely before removing the workpiece, off-cuts etc.
B. Mitre Cutting
This is a cross cutting operation, except that the saw blade is set at an
angle to the work, but remains perpendicular to the table. This is achieved
by mounting the complete
Head assembly on a table
which is free to rotate by up
to 45° .
To set the required mitre angle
unscrew the table securing
screws (H, fig.5), and rotate
the table, with the head and
saw blade, to the desired
position, lining up the angle
on the scale with the mark on
the edge of the table (J, fig.5).
Lock the table in position with
the locking screws (H).
The procedure for cutting is
the same as that for cross
cutting.
11
Fig.4
Fig.5