Clarke CWBP300 Instrukcja obsługi i konserwacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Pompa wodna Clarke CWBP300. Clarke CWBP300 13 stron. Submersible water butt pump
Drukuj stronę
PREPARATION
Remove all packaging and make sure that the product has no visible
damage. Dispose of all packaging appropriately.
ATTACHING THE TUBE AND HOSE
1. Screw the discharge tube/elbow
onto the outlet port as shown.
2. Connect a suitable garden hose
(not supplied) to the hose
connector.
• Suitable hoses are available
from your local Clarke dealer.
POSITIONING THE PUMP
1. Lower the pump into the water
butt with the outlet elbow over
the side of the water butt.
• Ensure the pump is positioned
with adequate space so that
the movement of the float
switch is not restricted -
recommended minimum area
of 50 x 50 cm.
2. Connect the plug to the mains
supply.
• Always use a high sensitivity
residual current device (RCD)
which has a tripping current of
30mA.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5