Clarke HIPPO 2 Instrukcja obsługi i konserwacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Pompa wodna Clarke HIPPO 2. Clarke HIPPO 2 5 stron. Submersible pump
Również dla Clarke HIPPO 2: Instrukcja obsługi i konserwacji (13 strony)
Drukuj stronę
If using this pump in a garden pond, please note that there is a small quantity of
oil in the pump seal. If the pump or seal is damaged, the oil may leak out, and
appear as a film on the surface of the water. Although harmless to people, the
oil must be cleared to prevent any possible harm to pond life. Disconnect the
pump from the electrical supply, remove it from the pond, and clear the oil,
then contact our Service Department for advice.
Spare Parts
Item Description
1
Base ..................................................................................... 7200940
2
Mud pack ........................................................................... 7200941
3
Cable with connector ...................................................... 7200942
4
Impeller (screw fit to shaft) .............................................. 7200943
5
Gasket ................................................................................. 7200944
6
Screen/filter ........................................................................ 7200945
7
1/2" adaptor ....................................................................... 7200946
8
3/4" adaptor ....................................................................... 7200947
9
1" adaptor .......................................................................... 7200948
PARTS & SERVICE CONTACTS
For Spare Parts and Service, please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
PARTS: [email protected]
SERVICE:
PARTS & SERVICE TEL: 020 8988 7400
or
e-mail as follows:
5
Part No.