CTEK 1046 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Ładowarka CTEK 1046. CTEK 1046 8 stron. Professional switch mode battery charger

hOW TO ChARGE

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains

cable is connected to the wall socket. The error lamp will indicate if the battery clamps

are incorrectly connected. The reverse polarity protection will ensure that the battery

or charger will not be damaged.

3. Press the MODE-button to select charging program.

4. Follow the 8-step display through the charging process.

The battery is ready to start the engine when STEP 4 is lit.

The battery is fully charged when STEP 7 is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

REAdY TO USE

ERROR LAMP

MOdE-

BUTTON

POWER

LAMP

TEMPERATURE

NORMAL

SENSOR

BATTERY

INdICATOR

PROGRAM

fULLY ChARGEd

AGM

RECONd

SUPPLY

BATTERY

PROGRAM

EN • 5