Acorn AC-309 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Acorn AC-309. Acorn AC-309 12 stron.

WIRING OF CEILING FAN:

2. Connect fan wires to ceiling wires: White to Neutra, Red to Live, Green to

Ground. If you opt for lightkit then connect the Blue to Live wire. If not,

cap the Blue wire off with a connector.

3. After connecting the wires, spread them apart so that the Green & White

wires are on one side and the Red wire is on the other side (fig 8).

4. Earth wire is longer than safety cord by 60mm and more. When the

failure of the suspension system occurs, the current carrying conductor

taut before the earthling conductor and the body of the fan assembly is

still effectively earthed.

5. Place the remote receiver inside the canopy (refer to the remote control

manual for remote receiver installation).

1) Total

connected from the top of the

motor:

* Red – Live wire for fan

* Blue – Live wire for lightkit

* Green – Ground wire

* White – Neutral wire

fig 8

1) After wiring done, lift up the

canopy towards the ceiling

and tighten with screw firmly

(fig 9).

fig 9

four colors of wires