Clarke CMSF110 Instrukcja obsługi i konserwacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Piła Clarke CMSF110. Clarke CMSF110 20 stron. Multi purpose circular saw

PREPARATION FOR USE

WARNING! THIS APPLIANCE SHOULD NOT BE USED BY ANYONE NOT

EXPERIENCED IN THE USE AND OPERATION OF POWER TOOLS

BEFORE STARTING WORK

IMPORTANT! Before use, ensure the workpiece is perfectly secure, and there is

sufficient clearance BENEATH the workpiece so that there is no possibility of

the saw blade coming into contact with any other object.

1. Check that all parts are secure, including the saw blade.

2. Ensure the power cable is well away from the saw blade and not looped

under the workpiece, then plug into the mains supply.

3. Always support work as near as possible to the cut.

4. Support the work so that the off-cut will be on your right hand side.

5. Clamp the workpiece so that it will not move during the cut.

6. Support large panels to minimise the risk of the blade being pinched in the

cut if the panel should sag during cutting. Place the supports as close to

the cut as possible.

7. The side of the workpiece on which, the finished appearance is seen,

should be face down while cutting.

8. Always ensure that the blade you are about to use is sharp.

9. Always check that the lower saw guard moves freely and closes instantly

before starting work.