Nikon Eclipse Series Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Nikon Eclipse Series. Nikon Eclipse Series 21 stron. Teaching head/ multi teaching head

Drukuj stronę

Assembly for the multi-viewing model by 5 persons

Assemble the system in the order of the numbers ([1] to [9]) in the figure below.

 Check that the serial numbers on the two components (on the main section and the relay section) of the MTH

relay unit are identical. (If the numbers are different, observation will be adversely affected. In this case, please

contact your dealer or nearest Nikon representative.) Two sets of MTH relay units are required. Assemble

those components with identical serial numbers to each other.

 Adjust the height of the support stand so that the main observer section and the secondary observer section

are horizontal. This step is facilitated by first adjusting the support stand to an approximate height before

attaching the stand.

ND filter (ø28 mm)

Secondary

Ensure that the

observer

pointer mounting

section

surface faces the

front.

Assemble in the same

manner as that for the

right side.

Remarks

If a trinocular eyepiece tube T is used for the main observer section, you can provide the image to the

vertical tube of the eyepiece tube by setting the optical path to the "BINO & PHOTO" position. If the ND

filter is removed in advance from the eyepiece tube mounting port of the MTH main splitter, the main and

the secondary observers will be able to view an image with more uniform brightness. This should be

convenient such as when performing the TV observation.

Chapter 3

[4]

Main observer

section

[3]

Clamp for [3]

Assembly

[1]

Check that the

serial numbers

are the same.

[5]

Clamp for [5]

MTH main splitter

[7]

Clamp for [7]

Place horizontally

[9]

MTH relay unit

Main section

Relay section

[2]

Upper surface should

also be horizontal.

Secondary

observer section

Clamp for [9]

[8]

Clamp for [8]

[6]

Height adjustment clamp screw

Adjust to an approximate

height and readjust later.