Discount Car Stereo A2D-JAG97 Skrócona instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria samochodowe Discount Car Stereo A2D-JAG97. Discount Car Stereo A2D-JAG97 7 stron. Music streaming for select 1986-97 jaguar

Drukuj stronę

Installing module to radio CD socket:

Click

here

to remove radio or click link below for dash removal instruction video.

XK models differ slightly.

https://www.youtube.com/watch?v=vpAIdr6V3iE

Disconnect CD changer plug (See Fig. 1) from radio socket (See Fig. 2)

Connect CD changer plug (See Fig. 1) to module 8-pin socket (See Fig. 4)

Connect module 8—pin plug (See Fig. 1) to CD socket (See Fig. 2)

Connect/splice or tap red wire (See Fig. 5) to vehicles 12V accessory

(switched) supply.

12V accessory is available on radio power harness (usually Green/Orange,

purple, red/white etc. Use a voltmeter or test light to verify voltage

condition prior to finalizing install.

Do not connect module red wire to 12V battery (always on).

Proceed to pairing

Fig. 5

Pairing

Pairing process varies among devices but basic steps are the same. This

process is done upon initial install and will not have to be repeated.

Turn ignition and radio "ON"

LED inside module peephole will flash (pairing mode)

Settings, Wireless & Networks, Bluetooth Settings

2. Go to device:

3. Select

Bluetooth

and turn it "ON" (if not already ON).

Scan for devices

4. Tap

5. Wait for Bluetooth device name to appear (See below) and tap.

LED inside module peephole glow steady.

Note: It is possible to pair multiple devices, but only one connection is supported.

Pairs automatically with device to which it was most recently connected.