Discount Car Stereo A2DIY-JAG98 Skrócona instrukcja instalacji Bluetooth - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji Bluetooth dla Akcesoria samochodowe Discount Car Stereo A2DIY-JAG98. Discount Car Stereo A2DIY-JAG98 11 stron. Bluetooth 1997-06 xk (x100)and 1998-03 xj (x308) with cd changer
Również dla Discount Car Stereo A2DIY-JAG98: Skrócona instrukcja obsługi (11 strony)

Drukuj stronę

Bluetooth module connection

In our 2001 XJR test vehicle with Premium Audio; Bluetooth module was installed

in armrest (See Fig. 10). This area is also home to factory phone plug (See Fig. 11)

and cigar lighter supply, either can be used to power module (see Fig. 10).

10-pin female plug

1. Connect/Tap module

red wire to

constant battery supply)

If vehicle has a factory phone plug (see Fig. 11/11a) under center armrest,

use chart below to locate accessory wire on said connector/plug.

test voltage prior to

finalizing.

Factory connector/Plug

10-pin Female (white)

Pin 10 (light green)

10-pin Male (yellow)

Pin 10 (white/green)

14-pin (yellow)

Pin 13 (Green)

18-pin male (yellow)

Pin 5 (Green)

Fig. 10

Fig. 11

12V accessory supply

(Do not connect to

Always

Accessory wire

Ground wire

Pin 6 (black)

Pin 11 (black)

Fig. 11a

14-pin male connector

2. If vehicle does not have a phone plug; use cigar lighter supply lines

under console:

White/Blue wire is accessory

Fig. 12

Note: Cigar lighter supply may introduce noise into the system

especially if used to supply a USB charging device, in which case

consider an alternate (we recommend factory phone plug). If engine

noise is still an issue, consider adding a

3. Connect 8-pin DIN audio plug routed from trunk/hatch (See Fig. 4) to

module female connector seen in Fig. 13

noise filter

or similar.