Discount Car Stereo A2DIY-JAG98 Краткое руководство по установке Bluetooth - Страница 5
Просмотреть онлайн или скачать pdf Краткое руководство по установке Bluetooth для Автомобильные аксессуары Discount Car Stereo A2DIY-JAG98. Discount Car Stereo A2DIY-JAG98 11 страниц. Bluetooth 1997-06 xk (x100)and 1998-03 xj (x308) with cd changer
Также для Discount Car Stereo A2DIY-JAG98: Краткое руководство по эксплуатации (11 страниц)
Печатать страницуBluetooth module connection
In our 2001 XJR test vehicle with Premium Audio; Bluetooth module was installed
in armrest (See Fig. 10). This area is also home to factory phone plug (See Fig. 11)
and cigar lighter supply, either can be used to power module (see Fig. 10).
10-pin female plug
1. Connect/Tap module
red wire to
constant battery supply)
If vehicle has a factory phone plug (see Fig. 11/11a) under center armrest,
use chart below to locate accessory wire on said connector/plug.
test voltage prior to
finalizing.
Factory connector/Plug
10-pin Female (white)
Pin 10 (light green)
10-pin Male (yellow)
Pin 10 (white/green)
14-pin (yellow)
Pin 13 (Green)
18-pin male (yellow)
Pin 5 (Green)
Fig. 10
Fig. 11
12V accessory supply
(Do not connect to
Always
Accessory wire
Ground wire
Pin 6 (black)
Pin 6 (black)
Pin 11 (black)
Pin 11 (black)
Fig. 11a
14-pin male connector
2. If vehicle does not have a phone plug; use cigar lighter supply lines
under console:
White/Blue wire is accessory
Fig. 12
Note: Cigar lighter supply may introduce noise into the system
especially if used to supply a USB charging device, in which case
consider an alternate (we recommend factory phone plug). If engine
noise is still an issue, consider adding a
3. Connect 8-pin DIN audio plug routed from trunk/hatch (See Fig. 4) to
module female connector seen in Fig. 13
noise filter
or similar.