Cub Cadet 19A70005100 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kosiarek Cub Cadet 19A70005100. Cub Cadet 19A70005100 20 stron. Twin rear bagger
Drukuj stronę
Mount Assembly on Tractor
Install mounting assembly on tractor as follows:
1.
Slide the mounting bracket assembly along the frame rails of
the tractor until the hooks in the mounting brackets align
under the shoulder bolts on your tractor, as seen in Fig. 4-4.
Figure 4-4
2.
Secure the mounting bracket assembly to the tractor using
two 711-0332 clevis pins and 714-04023 cotter pins from
hardware pack 689-00095. See Fig. 4-5.
Figure 4-5
3.
Install the bagger hanger assembly onto the mounting assembly
on the tractor by hooking it over the hitch plate between
the two tabs. See Fig. 4-6.
Figure 4-6
4.
Secure the hanger assembly to the mounting assembly using
a 5/16" bolt and flange nut packed in with this upright
bagger support. See Fig. 4-7.
Figure 4-7
s
ectiOn
Tabs
Top View
4 — a
& i
sseMbly
nstallatiOn
9