Cub Cadet 19A70005100 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kosiarek Cub Cadet 19A70005100. Cub Cadet 19A70005100 20 stron. Twin rear bagger
Drukuj stronę
Make sure screen sits under the cover's lip
Figure 4-11
5.
Install the bagger cover onto the bag support assembly, as
seen in Fig. 4-12. The plastic cover goes inside of the two
mounting tabs.
Figure 4-12
6.
Slide the hinge pin into the hole located on the mounting tab, as
in Fig. 4-13. Use the cut-out window (See inset in Fig. 4-13)
to line up the hinge pin on the other side and push pin all
the way in until it reaches the end-stop. At this point the
pin clips into place and is secured by a tab in the bagger
cover. See Fig. 4-14.
Figure 4-13
Figure 4-14
7.
Open Hood by pushing in on the rear, right-side tab with your
right hand, as seen in 1 of Fig. 4-15, and lifting the cover with
your left hand in the center rear of the bagger cover, 2.
2
Figure 4-15
s
ectiOn
1
4 — a
& i
sseMbly
nstallatiOn
11