Cub Cadet 19A70005100 Manuel de l'opérateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Cub Cadet 19A70005100. Cub Cadet 19A70005100 20 pages. Twin rear bagger
Imprimer la page
Make sure screen sits under the cover's lip
Figure 4-11
5.
Install the bagger cover onto the bag support assembly, as
seen in Fig. 4-12. The plastic cover goes inside of the two
mounting tabs.
Figure 4-12
6.
Slide the hinge pin into the hole located on the mounting tab, as
in Fig. 4-13. Use the cut-out window (See inset in Fig. 4-13)
to line up the hinge pin on the other side and push pin all
the way in until it reaches the end-stop. At this point the
pin clips into place and is secured by a tab in the bagger
cover. See Fig. 4-14.
Figure 4-13
Figure 4-14
7.
Open Hood by pushing in on the rear, right-side tab with your
right hand, as seen in 1 of Fig. 4-15, and lifting the cover with
your left hand in the center rear of the bagger cover, 2.
2
Figure 4-15
s
ectiOn
1
4 — a
& i
sseMbly
nstallatiOn
11