DiscountRamps Apex ATR-RACK-V2 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stojaki i stojaki DiscountRamps Apex ATR-RACK-V2. DiscountRamps Apex ATR-RACK-V2 8 stron. 4 post aluminum truck rack
Drukuj stronęSTEP 4. Completing your rack.
① Attach Ladder Stop Knob
(11), to Ladder Stop (9), using
Lock Washer (22), and M10
Nut (18), as shown. Do not
tighten yet. Repeat for all
four Ladder Stops.
④ Your installed rack should now resemble this diagram. Check to make sure all hardware has been
securely tightened. Congratulations, your rack is now ready for use. Please remember to haul your
loads safely.
Rev. 062118
② Install two completed Ladder
Stop assemblies in center
channel of each Crossbar
with
Ladder Stop Knobs
facing
outward.
tighten once desired position
is achieved.
DiscountRamps.com • 1-888-651-3431
③ Install all four Crossbar End
Caps (10), and secure in place
using ST4.8×16 Phillips Head
Self-Tapping Screws (16), as
Securely
shown.
Page 7