Discover Video Hornet Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów Discover Video Hornet. Discover Video Hornet 12 stron. Encoder/decoder

Limit to 30 fps – if your video input is 60 fps, limiting your



streaming to 30 fps will improve quality in most cases.

Latency Mode – only "Normal" is currently available.



Encoding Mode – Fixed or Variable. Variable allows the encoder to



"burst" data at a higher rate to maintain quality, but may not be

ideal for some networks. Fixed is the preferred mode.

Key Frame Interval – Determines how often a MPEG GOP I frame



and H264 "IDR" is produced. More key frames allow decoders to

start the video sooner, but reduces compression efficiency. Value

of 2 to 10 seconds is recommended depending on bit rate.

Video Encoding and Rate – Only H264 is available. The output bit



rate is set in Kbps (e.g. 1000 Kbps = 1 Mbps).

H.264 Profile – select Baseline, Main, or High profile. Generally,



lower bit rates should use Baseline, medium rates use Main, and

higher rates use High. High profile also puts more burden on the

decoding players.

Audio Encoding – Only Advanced Audio Codec Low Complexity



(AAC-LC) is available. The audio sampling rate is always 48 KHz.

The audio bit rate determines the quality of the audio. 128 Kbps is

a good choice for most uses.

Output Settings

The Output Settings is

where you configure

the Hornet to get

instructions from the

Discover Video DEVOS

or DVExpress system.

Copy the URL from

DEVOS to the RTMP

Output area as shown and select Apply then OK.

This setting will automatically set all other settings except for Decoder

settings.

Page 5

Hornet Encoder / Decoder

Hornet