Cube GTC Dodatkowe instrukcje obsługi - Strona 6
Przeglądaj online lub pobierz pdf Dodatkowe instrukcje obsługi dla Akcesoria rowerowe Cube GTC. Cube GTC 7 stron. Additional instructions for cube carbon frame and (full-) carbon forks
Również dla Cube GTC: Dodatkowe instrukcje (13 strony)
Drukuj stronę
10 |
SUPER HPC /HPC/GTC
9.0 Assembly Instructions
9.1 The MTB bike frame
Seat post assembly
For seat post assembly apply carbon assembly paste
(e.g. from Dynamix, Syntace, ...) to seat post and to the
Consider max. allowed seat post length (x)
inside of seat tube. It is not allowed to use standard
including min. insert length (y):
grease!
120 mm (y) at 400 mm (x)
120 mm (y) for adjustable seat post (e.g.
Consider torque on seat clamp and seat post!
RockShox Reverb) with max. 420mm (x)
Max. 6 Nm
110 mm (y) at 380 mm (x)
Apply torque gradually!
100 mm (y) at 350 mm (x)
Brake mount screw(s)
Max. 8 Nm
Rear derailleur mount screw
Max. 8 Nm
Bottom bracket
Use only suitable „Pressfit" bea-
rings. Special tools for assembly
and disassembly of "Pressfit"
bearings are necessary. Grease
is only allowed on frames with
alloy tube.
Head set assembly (integrated
/ semiintegrated) Special tools
for assembly and disassembly
of head set or head set cups are
necessary. Usage of grease is not
allowed!
Bottle cage assembly screws
Only M5 screws are allowed.
Max. 3Nm
Front derailleur mount screw
Band type
Max. 4Nm / Min. 3 Nm (apply gradually)
E-direct
Max. 7Nm / Min. 5 Nm (apply gradually)
Direct Mount
Max. 7Nm / Min. 5 Nm (apply gradually)
9.2 The racing bike frame
For seat post assembly apply carbon assembly paste
Seat post assembly
(e.g. from Dynamix, Syntace, ...) to seat post and to the
inside of seat tube. It is not allowed to use standard
Consider max. allowed seat post length
grease!
(x) including min. insert length (y):
100 mm (y) at 350 mm (x)
Consider torque on seat clamp and seat post!
80 mm (y) at 300 mm (x)
Max. 6 Nm
Apply torque gradually!
Brake mount screw
Max. 8 Nm
Rear derailleur mount screw
Max. 8 Nm
SUPER HPC /HPC/GTC
Head set assembly (integrated
/ semiintegrated) Special tools
for assembly and disassembly
of head set or head set cups are
necessary. Usage of grease is not
allowed!
Cable stop screws
Max. 1,5 Nm
Bottle cage assembly screws
Only M5 screws are allowed.
Max. 3 Nm
Brake mount screw
Max. 8 Nm
Front derailleur mount screw
Band type
Max. 4 Nm / Min. 3 Nm
(apply gradually)
Brazed-on type
Max. 4 Nm / Min. 3 Nm
(apply gradually)
Bottom bracket
Use only suitable „Pressfit" bea-
rings. Special tools for assembly
and disassembly of "Pressfit"
bearings are necessary. Grease
is only allowed on frames with
alloy tube.
| 11