CUBE in-a-box V3.Series Instrukcja montażu - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz CUBE in-a-box V3.Series. CUBE in-a-box V3.Series 6 stron.

- 2 -

Slide panel 1T* (24"W) in

between end-post A (37"H),

and a 2-way post B (57"H).

Then slide half-panel 2

(36"W) in between post B

and linear-post C (57"H).

*TIP 1: letter T is for panels

with a pre-installed alu cap

(only on top panels).

Slide second half-panel 2

(36"W) in between post C

and second 2-way post B.

Slide panel 3 (36"W) in

between 2-way post B and

second linear-post C.

Slide first panel 4T (36"W)

in between linear-post C

and 2-way post D (37"H).

Slide other panel 1T (24"W)

in between 2-way post D

and second end-post A.

Slide the raceway-frames 5

(without the covers) on top

of the two half-panels 2.

Black plastic cavaliers have

to be at the bottom.

Slide rail-panels 6** (hooks

facing up) on top of panel 4.

**TIP 2: rail-panels must be

installed with hooks facing

up so paper and pencil

trays can hold on them.

Slide last rail-panel 6

(hooks facing up) on top of

panel 3 between B and C.

Slide two panels 4T (36"W)

on top of the two rail-panels

6 above raceway-panels 5.