CUBE in-a-box V3.Series Montageanleitung Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Inneneinrichtung CUBE in-a-box V3.Series herunter. CUBE in-a-box V3.Series 6 Seiten.
Seite drucken
1
2
3
4
5
6
- 2 -
Slide panel 1T* (24"W) in
between end-post A (37"H),
and a 2-way post B (57"H).
Then slide half-panel 2
(36"W) in between post B
and linear-post C (57"H).
*TIP 1: letter T is for panels
with a pre-installed alu cap
(only on top panels).
Slide second half-panel 2
(36"W) in between post C
and second 2-way post B.
Slide panel 3 (36"W) in
between 2-way post B and
second linear-post C.
Slide first panel 4T (36"W)
in between linear-post C
and 2-way post D (37"H).
Slide other panel 1T (24"W)
in between 2-way post D
and second end-post A.
Slide the raceway-frames 5
(without the covers) on top
of the two half-panels 2.
Black plastic cavaliers have
to be at the bottom.
Slide rail-panels 6** (hooks
facing up) on top of panel 4.
**TIP 2: rail-panels must be
installed with hooks facing
up so paper and pencil
trays can hold on them.
Slide last rail-panel 6
(hooks facing up) on top of
panel 3 between B and C.
Slide two panels 4T (36"W)
on top of the two rail-panels
6 above raceway-panels 5.