3DHobbyShop.com Vyper 46" ARF Instrukcja montażu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Zabawka 3DHobbyShop.com Vyper 46" ARF. 3DHobbyShop.com Vyper 46" ARF 19 stron.
Drukuj stronę
4
Remove the covering on both sides of the fuselage as shown, for the wing spar tube, aileron wire access,
wing retaining screw, and anti-rotation pin. Use either a sharp hobby knife or hot soldering iron to cut the
covering away.
Also remove the covering over the horizontal stabilizer slot as shown, on both sides.
Using a generous amount of thick or medium Ca glue in the slot, install the vertical stabilizer onto the
fuselage as shown: