3DHobbyShop.com Vyper 46" ARF 조립 설명서 - 페이지 4

{카테고리_이름} 3DHobbyShop.com Vyper 46" ARF에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHobbyShop.com Vyper 46" ARF 19 페이지.

Remove the covering on both sides of the fuselage as shown, for the wing spar tube, aileron wire access,

wing retaining screw, and anti-rotation pin. Use either a sharp hobby knife or hot soldering iron to cut the

covering away.

Also remove the covering over the horizontal stabilizer slot as shown, on both sides.

Using a generous amount of thick or medium Ca glue in the slot, install the vertical stabilizer onto the

fuselage as shown: