3DHobbyShop.com Vyper 46" ARF 조립 설명서 - 페이지 5

{카테고리_이름} 3DHobbyShop.com Vyper 46" ARF에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHobbyShop.com Vyper 46" ARF 19 페이지.

3DHobbyShop.com Vyper 46
5
Slide the horizontal stabilizer into the fuselage cutout and center it side-to-side, measuring with a ruler.
Locate the carbon wing-spar tube. Slide it into the fuselage and slide the wings on as shown. Measure
as shown with a tape measure or yardstick to ensure that the stabilizer is straight. Both sides should
measure exactly the same.
Apply thin CA glue to the joint of the horizontal stabilizer and fuselage. Allow the thin Ca to wick into the
joint. NOTE: It is not necessary to remove any covering on the stabilizer.