3DHobbyShop.com Vyper 46" ARF Руководство по сборке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по сборке для Игрушка 3DHobbyShop.com Vyper 46" ARF. 3DHobbyShop.com Vyper 46" ARF 19 страниц.

Slide the horizontal stabilizer into the fuselage cutout and center it side-to-side, measuring with a ruler.

Locate the carbon wing-spar tube. Slide it into the fuselage and slide the wings on as shown. Measure

as shown with a tape measure or yardstick to ensure that the stabilizer is straight. Both sides should

measure exactly the same.

Apply thin CA glue to the joint of the horizontal stabilizer and fuselage. Allow the thin Ca to wick into the

joint. NOTE: It is not necessary to remove any covering on the stabilizer.