3DR Y6 Instrukcja montażu - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Drony 3DR Y6. 3DR Y6 13 stron.
Również dla 3DR Y6: Skrócona instrukcja obsługi (8 strony)

Drukuj stronę

1. Contents of the Kit

Radio

Calibration: Turn on your RC transmitter, select

switches to their extreme positions. Select

available channels.

Show me! Watch videos demonstrating live calibration techniques at 3DRobotics.com/learn.

Complete all configuration procedures as described at

before attempting your first flight.

MOTOR S & PROPELL ER S

The diagram below shows the correct rotation direction for each motor. Before attaching pro-

pellers, test the motors to ensure the motor rotation is correct.

Blue arms

CCW

The rotation direction for each motor is determined

by the connections between the motor and the ESC.

To reverse the rotation direction for a motor, switch

two of the three wires connecting the motor and

the ESC.

Your copter includes normal propellers (unmarked

or marked "SF") and pusher propellers (marked

"SFP" or "P"). Add pusher propellers to motors

marked clockwise, add normal propellers to motors

marked counterclockwise. Use 10-inch props for

top motors and 11-inch props for bottom motors.

Remove plastic rings from propeller package, select

the one with the larger internal diameter, and insert it

into the back of the propeller hub.

Add propeller to motor collet with writing

facing up in relation to the sky. This means

you'll need to attach props to bottom motors

upside down! Add the washer and prop nut above

the propeller; tightly fasten prop nut to threaded collet.

S EC U RE W IR ING

Before flying, use zip ties to secure ESCs to the frame.

CCW

Y6 motor order

Safety Check! Ensure writing on props faces up.

Calibrate

Click when Done

once the red bars are set for all

CCW

COUNTERCLOCKWISE ROTATION:

CCW

USE NORMAL PROPELLER

CLOCKWISE ROTATION:

USE PUSHER PROPELLER

1. Connection between motor and ESC

2. Switch two wires to reverse motor rotation.

Collet

Radio, and move all sticks and

copter.ardupilot.com

Prop nut

Washer

Motor