3DR Y6 Instrukcja montażu - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Drony 3DR Y6. 3DR Y6 13 stron.
Również dla 3DR Y6: Skrócona instrukcja obsługi (8 strony)

Ensure that all wires are secured so they

will not become entangled in spinning

propellers, are not too tight around corners

(no hard 90-180 degree bends), and do not

pull on the APM or other components.

FO L D I NG

Your Y6 can fold for ease of transport. To collapse the blue arms, remove thumb nuts and bolts

from outer holes, and slide blue arms toward black arm.

Flight position

To collapse the legs, remove the bolts and nuts from the inner holes where the legs attach to

the arms.

Flight position

Visit

copter.ardupilot.com

and software configuration, using autonomous flight modes, tuning,

designing missions with waypoints and events, troubleshooting, and

more. For customer support, contact us at

call our support line at

Remove thumb nuts and

bolts from outer holes.

Remove nut and bolt

from inner hole.

to learn about multicopter safety, hardware

+1 (858) 225-1414

ESCs and wiring secured with zip ties

Travel position

M-F 8-5 PST. Happy flying!

Fold.