Baltech VP-3410 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Baltech VP-3410. Baltech VP-3410 12 stron. Vibration meter
Również dla Baltech VP-3410: Instrukcja obsługi (16 strony)
Drukuj stronę2.3.3 Execution of measurement
1. Hold the measurement button during 10 seconds, after
this the vibration meter is ready for measurement;
2. Press the measurement button and hold it, mount the
sensor on the measurement object. The screen will display
the measurement results; release the measurement button.
The measured value will be saved on the screen, you can
read and record it.
3. Press the measurement button for further measurements.
-
If the measurement button is not pressed within one
minute, the device will switch off automatically;
-
The sensor must be mounted on the measurement object
tightly, otherwise you can have inaccurate measurement
results.