Baltech VP-3410 Kullanım Kılavuzu - Sayfa 10
Ölçüm Cihazları Baltech VP-3410 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Baltech VP-3410 12 sayfaları. Vibration meter
Ayrıca Baltech VP-3410 için: Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır2.3.3 Execution of measurement
1. Hold the measurement button during 10 seconds, after
this the vibration meter is ready for measurement;
2. Press the measurement button and hold it, mount the
sensor on the measurement object. The screen will display
the measurement results; release the measurement button.
The measured value will be saved on the screen, you can
read and record it.
3. Press the measurement button for further measurements.
-
If the measurement button is not pressed within one
minute, the device will switch off automatically;
-
The sensor must be mounted on the measurement object
tightly, otherwise you can have inaccurate measurement
results.