Baltech VP-3410 Kullanım Kılavuzu - Sayfa 8
Ölçüm Cihazları Baltech VP-3410 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Baltech VP-3410 12 sayfaları. Vibration meter
Ayrıca Baltech VP-3410 için: Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır2.2.3 Measurement mode
Press the button «SET» to select a measurement mode:
acceleration, velocity or displacement; the selected mode is
indicated by the arrow on the right side of the screen.
Figure 2
2.2.4 Selection of frequency range interval
When measuring acceleration, you can use a button of the
frequency range change. The selected frequency range is
indicated by the arrow on the left side of the screen.
Measurement ranges (LO/HI) are shown on the figure 3.
Figure 3
HI: 1kHz– 10 kHz is used for high-frequency vibration measurement
LO: 10 Hz – 1 kHz is used for overall vibration measurement
Note: selection of the frequency range is possible only for
acceleration measurement
Acceleration
Velocity
Vibration
displacement
Measurement
mode indicator