Baltech VP-3410 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Baltech VP-3410. Baltech VP-3410 12 pages. Vibration meter
Également pour Baltech VP-3410 : Manuel d'utilisation (16 pages)

Imprimer la page

2.2.3 Measurement mode

Press the button «SET» to select a measurement mode:

acceleration, velocity or displacement; the selected mode is

indicated by the arrow on the right side of the screen.

Figure 2

2.2.4 Selection of frequency range interval

When measuring acceleration, you can use a button of the

frequency range change. The selected frequency range is

indicated by the arrow on the left side of the screen.

Measurement ranges (LO/HI) are shown on the figure 3.

Figure 3

HI: 1kHz– 10 kHz is used for high-frequency vibration measurement

LO: 10 Hz – 1 kHz is used for overall vibration measurement

Note: selection of the frequency range is possible only for

acceleration measurement

Acceleration

Velocity

Vibration

displacement

Measurement

mode indicator