Baltech VP-3410 운영 매뉴얼 - 페이지 8

{카테고리_이름} Baltech VP-3410에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baltech VP-3410 12 페이지. Vibration meter
Baltech VP-3410에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

페이지 인쇄

2.2.3 Measurement mode

Press the button «SET» to select a measurement mode:

acceleration, velocity or displacement; the selected mode is

indicated by the arrow on the right side of the screen.

Figure 2

2.2.4 Selection of frequency range interval

When measuring acceleration, you can use a button of the

frequency range change. The selected frequency range is

indicated by the arrow on the left side of the screen.

Measurement ranges (LO/HI) are shown on the figure 3.

Figure 3

HI: 1kHz– 10 kHz is used for high-frequency vibration measurement

LO: 10 Hz – 1 kHz is used for overall vibration measurement

Note: selection of the frequency range is possible only for

acceleration measurement

Acceleration

Velocity

Vibration

displacement

Measurement

mode indicator